Hot water tank hook up

A water heater is an important aspect of a home that lasts years, not only for the comfort and amenities, but also because it is a major source for energy use. There are many options available when choosing a water heater, and every aspect affects the price. Tank water heaters have a larger reserve of hot water, meaning you can use it for multiple tasks at once, like taking a shower and washing dishes. They are much less expensive to install and maintain, although they do end up costing more each year in energy costs. Tank water heaters also tend to provide hot water more quickly than tankless systems.

Water Heater Installation- How Long Should It Take?

Dan has been in the HVAC industry for 23 years with experience ranging from installation and service to sales and distribution. Replacing your hot water tank can be a costly venture. So how can you afford to get this done and take a nice hot shower without crying the "I'm Broke Blues" in the process? Well, perhaps this will help. The following is a sort of documentary of my recent water heater replacement chore.

Once you've seen what I've done here and picked up on the materials that are available to you to make it simple, you too could choose to do it yourself. First thing is first, let's get this old beater water heater drained so we can get it cut loose and out of here. I don't know about you but after new parts, band-aiding, and finally leaking all over my floor, I'm ready to see her go.

Draining the water heater is easy but be sure to get it started first since it will take a while to drain off and no one wants to carry water heater up a flight of stairs while there's still water in it. It makes it heavy and will more than likely create a mess along the way. Understand that when reading about draining your heater, that's where we stop. We're only draining it so we can remove it and no flushing or refilling is necessary.

Just get it drained and stop. Now that you've read up on how to drain your water heater, be sure the gas is turned off at the valve, not just at the control module. We will soon be disconnecting the gas line so we certainly want to make sure it is off at the valve. This is very simple. Just turn the gas valve a quarter turn so that the handle is parallel to the gas line. Just remember that in doing this, the gas is still waiting on one side of the valve though it is off on the other.

As for the flue, it's got to come off too. The flue, or chimney, is reusable as long as it's intact and not rusting through. Take it off by removing the screws that are holding it to the draft hood and those holding it to the remaining chimney. Again, this is quite simple and you really only need to be careful with the adjustable joints in the flue so that they don't break apart if you twist too hard or in the wrong direction since they may have grown a bit stiff over the years.

Okay, so this is the part that everyone freaks out about and with good reason. Gas is explosive and that seems to bother people. I get it but honestly, electricity is scarier if you ask me and I've worked with both regularly for many years. You see, gas warns you if something is wrong. It will hiss and it will stink, both letting you know that something is not right. Before we move on, just pay attention with your eyes, nose, and ears as you do this part. Loosen the line slowly so that you can stop immediately and begin to tighten it back up should you hear hissing from the line.

This would mean that somehow, you had forgotten to shut it off or shut it off completely. If you unscrew it fast, you risk the line coming apart completely before realizing there is a problem. Trust me, if you're paying attention you're not likely to have any problems. One last thing Did I really need to say that? Yes, yes I did. Okay, so we disconnect the line at what is called the union. The union will be located between the main valve and where it connects to the water heater.

It is a fitting that allows the line to be joined to a stationary object. Otherwise, you would reach a point where you'll need to screw the line into the heater and as you do, it will unscrew from the last piece you connected. You place one pipe wrench on the big nut, pulling left to right and one on the smaller nut below, pulling right to left.

This will "break" open the union allowing it to be split in half. Once the union is open, take the remaining gas line off of the old tank. So long as this pipe is in good condition, you will use it to connect to your new water tank. Many times, the new tank and the old tank will line right back up. If not, miscellaneous gas fittings can be purchased at just about any hardware or home improvement store. Okay, the last thing we need to do before taking this piece of junk to the scrap heap is cut it loose from the water lines.

On the hot water side, we don't really have much to worry about in the way of where we cut the line. The water from this side of the tank is off and emptied so we won't have any real mess to speak of. Your only real consideration here is how much you'll have to do to reconnect it. This is definitely a "less is more" scenario. If at all possible, we'd like to just go up a few inches off the tank and cut so that we can use as little material as possible connecting our new tank.

As for the cold water side, if you have a shut off valve that is in good shape, you'll want to cut below that so that you can keep the water on to the rest of the house and if not, you'll have to shut off the water at the main and I suggest installing a new valve while you have this all opened up. Use a copper tubing cutter to cut your water lines. It's important not to go to fast meaning you snug it up to the line, go around a couple times then tighten again, then go around a couple times, then tighten and so on.

Okay, a couple of little things here before we get started putting our new tank in that I think will give you a "heads up" and maybe save you a couple dollars too. If it was on top of the old tank, like mine, and will be on the side of the new tank, you can make 2 cuts on the tube, one on the vertical drop and one on the horizontal run.

Doing this will allow you to "couple" the line back together, cut it to length and reuse it on the new tank instead of buying another one. Also, since you're likely cracking open your new tank, don't throw away any paperwork. You're going to have to register your warranty and you may even want to take the sticker off the box that has the model and serial number stamped on it and tape it to your paperwork so it's convenient if you ever need it for warranty parts.

Lastly, clean up the area. Clean where you're new tank will sit since you won't have access to this spot again for some time and once the new tank goes in, it could be hard to tell if you have new water messes or old water messes when you're testing the connections and such for your new tank. A clean slate will help to detect any issues before "sticking a fork in" this project.

Now, the rest of the family would like to have hot water again sometime today so Installing our water heater is really as easy as reversing everything we just did. We need to put the new water tank in place being sure that the hot and cold water sides are properly lined up with the plumbing as it was before. Not everything has to be in perfect place as you will have some room for adjustment as you go but let's get it pretty close here.

I suggest reconnecting in the following order. Since everyone will have a slightly unique situation in reconnecting their water heater, let me just offer you some tips and lists that will help you to determine your best approach. It's not uncommon for a new tank to leave some dampness on the floor when it's first being used. This is because there is an insulated lining between the tank and the outer shell that can gather humidity while in storage waiting to be sold.

Now when you heat it up, that trapped moisture will condensate, run to the bottom of the tank and onto the floor. Give it a day. If you still see water down there then you may have a problem. Now, I'm not talking about a running river here. If you have that much water, there is definitely a problem but if it's just a smaller amount, I wouldn't panic. It will likely be gone tomorrow. This is true for most residential water heaters.

At least those that are between 40 and 50 gallons. Many people have avoided plumbing for the reason of having to "sweat" or solder copper fittings. Well, let me introduce you to the push fitting. Push fittings couldn't have made plumbing any easier. You simply push the fitting onto the pipe and "voila", you're done. You can even remove the fitting with a special, very inexpensive tool made by the manufacturer. You simply slide the tool onto the pipe, push it against the end of the fitting, wiggle and It's off again.

These fittings can even be turned or rotated once they're installed so you don't even have to be perfectly straight right away when say making sure the handle of a valve is in front. Go ahead, put it on backwards Once in place, just spin it into where you want it and "voila" you're a pro. These fittings are nearly as good as an invention as running water itself.

You may have heard otherwise but I have used these all over my home and have yet to have a problem. I don't suggest using them in areas that are inaccessible simply because the oldest one I have is 7 years and though it's holding up fine, these haven't been around long enough to say what they'll do in That said, for our purposes here They are a bit more expensive but worth every penny as far as I'm concerned. Just place the insert in the pipe and listen for the click, click.

As for compression and threaded fittings Again, really simple and no soldering. Just put a little Teflon tape on the nipple, hand tighten them down, put a wrench on it to snug it up and yep, "voila". One last thing and then I'll let the pictures do the talking. You'll hear the term "dielectric" be thrown around when talking about water tank installation.

When your water heater begins to leak, you have to replace it fast. We'll show you how to install your own gas water heater in less than a day. Even if you. A water heater, especially an electric model, is a very simple device. Unfortunately, such simplicity doesn't really extend to its installation.

Your Name required. Your Email required. Rv hot water heater hook up Since most lasting at the heating water heater in any household — for a costly venture.

Dan has been in the HVAC industry for 23 years with experience ranging from installation and service to sales and distribution.

Installing your new water heater is only a moderately complicated task. The important things to remember are to take the steps in their proper order, recognize you are dealing with both water and power and brief yourself on the steps before you dive in. Need to hire a plumber?

Top 8 Water Heater Installation Problems

Is your water heater failing or leaking? There's more to consider beyond water heater prices. Installing a new water heater can be dangerous, so it's best to hire a licensed plumber. If you've noticed your showers becoming shorter and shorter due to a lack of hot water, it's likely you've asked yourself how much it costs to install a new water heater and what factors influence that price? So how much should it cost?

How to Hook Up an Electric Hot Water Tank

Tired of running out of hot water? Think about it: The way most households in this country heat water is absurdly wasteful. If a teenager takes a long shower, or a spouse settles in for a tub soak, there can be a long wait for that emptied tank to reheat. Then there are the nagging worries: Is it filled with energy-robbing sediment? Will it spring a leak? Both are reasonable concerns, as tanks generally fail in 8 to 12 years.

Give us a few details so we can match you with the right professionals.

Unheated water lines to connect my household gas ball valve to a generator. To hook up a water heater heating cooling. Installation to the water would i was shocked to the thermocouple.

Electric Water Heater Installation: Step-by-Step Directions to Do It Yourself

In this how-to video, This Old House plumbing and heating contractor Richard Trethewey shows the correct—and safe—way to install a water heater. In this video, This Old House plumbing and heating contractor Richard Trethewey explains how to replace a water heater. Turn off cold-water pipe leading into the water heater. Shut off the gas supply to the heater. Drain water from the heater using a garden hose. Use a tubing cutter to sever the cold- and hot-water pipes connected to the heater. Disconnect the union that connects the gas pipe to the heater. Remove old water heater. Set new heater on top of blocks. Attach exhaust flue to top of heater.

How To Install An Electric Water Heater

You will thank yourself a million times over for choosing tankless water heating. Be aware that there will be a slight delay for the hot water to arrive at your fixtures and that the money saved in standby loss is offset by the higher cost of equipment, gas pipe, flue pipe and materials. To create this article, 20 people, some anonymous, worked to edit and improve it over time. This article has also been viewed , times. Water Heating Systems.

By using our site, you acknowledge that you have read and understand our Cookie Policy , Privacy Policy , and our Terms of Service. I just had a plumber install a new 50 gallon water heater, but the cold water pipe is installed to the hot side the left pipe when facing the front of the heater and the hot water pipe is installed to the cold side the right pipe when facing the front of the heater. Is this ok? I thought that the cold water pipe had to go into the cold intake value and the hot water pipe would be connected to the hot value. So I called the plumber and he said that everything is installed correctly. And he wouldn't change the plumbing. Yes, reversing them would be a bad thing.

Increase the search radius for more results. Based on the radius, a new location list is generated for you to choose from. Get an alert with the newest ads for "hot water tank installation" in Ontario. All rights reserved. Use Distance Search to find Ads based on where you are and how far you want to travel. Search radius km Increase the search radius for more results. Update Cancel. Sign Up.

Dealing with plumbing issues is never convenient. And leaks. Cold shower anyone? Fortunately, scheduling a water heater installation is fast and painless. Installations time, costs and energy usage vary between systems so being informed will ultimately save you time and money.

A water heater, especially an electric model , is a very simple device. Unheated water enters one side of the tank. The water is heated by a couple of electric resistance elements that extend from the side of the tank into the middle of the water. And then on demand the water exits from the other side of the tank. Unfortunately, such simplicity doesn't really extend to its installation. While far from difficult, installing an electric water heater does involve plumbing and electrical work, which may be enough to put off quite a few people.

40 gallon electric water heater replacement from start to finish
Related publications